Process Technology Logo

Distributed by:

CDI Equipment Division logo

Equipment Overview | Filter Pump Industries / Penguin Pump | Process Technology

 

Immersion Heaters: B Series, Small Tank Metal Heater

Immersion Heaters: B Series, Small Tank Metal Heater
WATTS VOLTS HOT ZONE in./(mm) LENGTH in./(mm) 304 SS
Model Number
316 SS
Model Number
Titanium
Model Number
SHIP WT. Lbs./(kg)
500 120 5 (130) 10 (255) FB.5110-** SB.5110-** TB.5110-** 5 (2)
500 240 5 (130) 10 (255) FB.5210-** SB.5210-** TB.5210-** 5 (2)
1000 120 8 (205) 14 (355) FB1114-** SB1114-** TB1114-** 6 (2.5)
1000 240 8 (205) 14 (355) FB1214-** SB1214-** TB1214-** 6 (2.5)
1500 120 11 (280) 17 (430) FB1.5117-** SB1.5117-** TB1.5117-** 8 (3)
1500 240 11 (280) 17 (430) FB1.5217-** SB1.5217-** TB1.5217-** 8 (3)
2000 240 14 (355) 23 (585) FB2223-** SB2223-** TB2223-** 9 (3.5)

Features and Benefits

SUPERIOR CHEMICAL RESISTANCE:
  • Materials available for use in most aqueous alkaline solutions, plating solutions, and rinse tanks. Check solution recommendation chart or with your chemical supplier for proper sheath material selection.

RUGGED CONSTRUCTION:
  • Heavy wall metal sheaths available in 304 stainless steel, 316 stainless steel and titanium.

OUTSTANDING PERFORMANCE:
  • Watt densities of 45 watts per square inch (6.9 w/cm2) ensure long service life.

CORROSION RESISTANT HEAD:
  • Vapor resistant, flame retardant polypropylene terminal enclosure with 3-foot (.9m) flexible PVC liquid tight conduit.

SAFETY FEATURES:
  • Grounded construction.
  • Thermal protector built in. Replaceable P1 protector standard for solutions up to 180° F (82° C).
  • Non-floating construction.

CERTIFICATIONS:
  • UL listed to U.S. and Canadian safety requirements, and CE.

SIZES:
  • 500 watts to 1,500 watts.

VOLTAGES:
  • 120 to 415 volts. Single phase only.

CONSULT FACTORY FOR THE FOLLOWING:

  • Replaceable thermal protectors:
    • P4: for solutions from 180° F (82° C) to 230° F (110° C).
  • Resettable thermal protectors:
    • P2: bi-metal switch for solutions up to 180° F (82° C).
    • P6: for solutions from 180° F (82° C) to 230° F (110° C).
  • Special configurations and lengths.
  • Longer wire and conduit lengths.
  • Lower watt densities for highly viscous solutions.
  • Temperature and level controls sized to match the heater.

We recommend temperature controls and level controls for use with this immersion heater.

Downloads: